|
4 Point 10 Amp triac board P/N PCB10T4 (LxWxH) 4.25"x5.25"x1.25"
$ call for quantity discounts - Four 25 AMP 600 volt triacs fused at 10 AMPS and connected with a common AC return on one side. - 24 to 240VAC drive capability. UL recognized for 120 VAC operation at 6.5 Amps per triac. - The triacs now plug into the PC board. If a triac is damaged it can be removed and replaced without soldering. - Each triac has a snubber circuit which allows it to drive inductive or resistive loads. - Zero cross detect circuitry ensures long bulb life by turning lamps on only when AC voltage is crossing zero volts. - Easy to connect. Wire capture terminal block for power and wire capture removable plug for optoisolator drive. - 1 year warranty. Let us assist your design team with incorporating this board into your next application. Consultations and system layout assistance are free.
 * 25 AMP 600 volt triacs are fused at 10 AMPs. * AC connector is rated at 20 AMPS. * Fuse clips are rated at 25 AMPS and are constructed of silver plated beryllium Copper. * Triacs plug into board. No soldering necessary. * Opto triac drivers are in sockets. * Extra wide board traces. APPLICATIONS
- Placed remotely from the controller board allows the customer to run one main AC line to the location instead of running
|
